Schluter KERDI-SHOWER-LTS Sloped Tray For Linear Drain (Choice Of Size)

Schlüter-KERDI-SHOWER-LTS is a sloped tray made of compression-resistant polystyrene with pre-adhered Schlüter-KERDI waterproofing. In showers, it creates a sufficient slope to the linear drainage Schlüter- KERDI-LINE positioned along walls. 

The sloped tray is installed on a level, flat, load-bearing substrate and fitted to the drainage channel. In cases of vertical drainage, the sloped tray can also be installed directly on suitable substrates. 

Where necessary the trays can be cut to size with a utility knife, using the pre-marked cutting grooves on the underside of the tray.

Material:
The sloped tray is made of compression-resistant expanded polystyrene (EPS). A KERDI waterproofing membrane is laminated on the surface of the sloped tray. Schlüter-KERDI is a waterproofing membrane made of soft polyethene with a special fleece fabric surface for effective anchoring in tile adhesive and other covering materials.

Properties & Area Of Application:
Schlüter-KERDI-SHOWER-L assemblies, in conjunction with the linear drainage KERDI-LINE, are classified as K3 according to DIN EN 1253, Gullies for buildings. This class refers to areas without vehicle traffic, e.g. wetrooms in apartments, nursing homes, hotels, schools, and public washroom and shower facilities. The floor area can withstand normal foot traffic, regardless of the tile dimensions. An additional load distribution layer or larger tile formats should be installed if higher traffic loads, e.g. from wheelchair use, are expected. The suitability of KERDI- SHOWER-L must be verified based on the anticipated chemical, mechanical and/ or other stresses.

2% Slope.