The slope profile (approx. 2% slope) made of polished stainless steel (V2A) is a technically ideal and visually perfect joint (floor slope <-> wall area) for level-access tiled showers with linear drains. Even showers with printed rear panel walls can be professionally and easily installed using the SHOWER-GK perimeter joint slope profiles.
Installation:
Warning: When shortening the slope wedge profile, always cut at the highest point. Press the slope wedge with perforated fastening flange into the fresh adhesive layer and align. Align the tile applied afterwards so that the wall tiles or other suitable shower rear panels are flush with the slope wedge. Create a joint of approx. 1 to 1.5 mm and completely fill with grout.
GKWR 80-SF/98
- Height 1: 8mm
- Height 2: 9mm
- Height 3: 24mm
- Length: 0.98m
GKWR 80-SF/120
- Height 1: 8mm
- Height 2: 9mm
- Height 3: 32mm
- Length: 1.2m
GKWR 80-SF/148
- Height 1: 8mm
- Height 2: 9mm
- Height 3: 32mm
- Length: 1.48m
GKWR 80-SF/200
- Height 1: 8mm
- Height 2: 9mm
- Height 3: 40mm
- Length: 2m